TREMDrain™ 6000X Multi-Composite Drainage Material

Back

TREMDrain™ 6000X

Multi-Composite Drainage and Protection Board

TREMDrain™ 6000X

Multi-Composite Drainage and Protection Board

TREMDrain™ 6000X is a multi-composite prefabricated drainage material and protection board consisting of a formed, virgin polypropylene core with a non-woven geotextile fabric bonded on both sides. This three-layer drainage board consists of a 10 mm dimple core, providing 18 gal/min/ft of width and a compressive strength of 15,000 lbs/ sq ft, one layer of non-woven geotextile fabric (black) on the dimpled side, and a second layer of non-woven geotextile fabric (white) on the non-dimpled side.

Download Data Sheet Find a Rep or Distributor

Benefits of Using TREMDrain 6000X in Your Next Project

Fully Compatible

Used with TREMproof® and Paraseal® waterproofing membranes as both a protection course and drainage system

Streamlined Installations

Replaces or eliminates the need for a separate protection course

Improved Water Flow

Provides an uninterrupted flow plane and eliminate the opportunity for hydrostatic pressure to form against a wall

Lightweight for Easy Installations

Lighter weight means easier installations compared to conventional pipe and stone drainage

Easy Detailing

Fabric overhang allows for for easy detailing

TREMDrain 6000X Is Best For

Vertical walls greater than 20 ft (6.1 m)
Blindside applications where fluid applied waterproofing will be installed directly on the drainage mat

Product Properties

ASTM D1621: Compressive Strength	15,000 lb/ft² (718 kPa)
ASTM D1777: Thickness	7/16 in (10mm)
ASTM D4716: In-Plane Flow Rate	18/gal/min/ft (223 L/min/m)
Roll Length	50 ft (15.24 M)
Roll Width	6 ft (1.8 M)

TREMDrain 6000X Resources

Download any of these featured resources or find a specific type of document below.

Data Sheet

Application/Installation Instruction

Product Literature

Detail Drawing

Comparing TREMDrain 6000X

	TREMDrain™ 6000X	TREMDrain™ 1000NW	TREMDrain™ 6000 NW	TREMDrain™ NW
ASTM D1621: Compressive Strength	15,000 lb/ft² (718 kPa)	15,000 lb/ft² (718 kPa)	15,000 lb/ft² (718 kPa)	11,000 lb/ft² (527 kPa)
ASTM D1777: Thickness	7/16 in (10mm)	7⁄1₆” (11 mm)	0.4 in (10.16 mm)	¼ in (6.35 mm)
ASTM D4716: In-Plane Flow Rate	18/gal/min/ft (223 L/min/m)	18 gpm/ft (224 Lpm/M)	18 gpm/ft (224 Lpm/M)	12.5 gpm/ft (155 Lpm/M)
Roll Length	50 ft (15.24 M)	50 ft (15.24 M)	50 ft (15.24 M)	50 ft (15.24 M)
Roll Width	6 ft (1.8 M)	4 ft (1.22 M)	6 ft (1.8 M)	4 ft (1.22 M)