TREMDrain™ 6000NW Multi-Composite Drainage Material

Back

TREMDrain™ 6000 NW

Multi-Composite Drainage and Protection Board

TREMDrain™ 6000 NW

Multi-Composite Drainage and Protection Board

TREMDrain™ 6000 NW is a multi-composite prefabricated drainage material and protection board consisting of a formed polypropylene core covered on one side with a high strength, spun-bonded polypropylene filter fabric. TREMDrain 6000 NW is designed for single-sided subsurface vertical drainage applications requiring a typical non-woven filter fabric bonded to a high compressive strength and high flow capacity formed core.

Download Data Sheet Find a Rep or Distributor

Benefits of Using TREMDrain 6000 NW in Your Next Project

Fully Compatible

Used with TREMproof® and Paraseal® waterproofing membranes as both a protection course and drainage system

Streamlined Installations

Replaces or eliminates the need for a separate protection course

Improved Water Flow

Provides an uninterrupted flow plane and eliminate the opportunity for hydrostatic pressure to form against a wall

Lightweight for Easy Installations

Lighter weight means easier installations compared to conventional pipe and stone drainage

TREMDrain 6000 NW Is Best For

Vertical walls greater than 20 feet (6.1 m)
Select horizontal installations requiring high compressive strength and where high flow capacity is necessary

Product Properties

ASTM D1621: Compressive Strength	15,000 lb/ft² (718 kPa)
ASTM D1777: Thickness	0.4 in (10.16 mm)
ASTM D4716: In-Plane Flow Rate	18 gpm/ft (224 Lpm/M)
Roll Length	50 ft (15.24 M)
Roll Width	6 ft (1.8 M)

TREMDrain 6000 NW Resources

Download any of these featured resources or find a specific type of document below.

Data Sheet

Product Literature

Cert Letter

Detail Drawing

Comparing TREMDrain 6000 NW

	TREMDrain™ 6000 NW	TREMDrain™ 1000NW	TREMDrain™ 6000X	TREMDrain™ NW
ASTM D1621: Compressive Strength	15,000 lb/ft² (718 kPa)	15,000 lb/ft² (718 kPa)	15,000 lb/ft² (718 kPa)	11,000 lb/ft² (527 kPa)
ASTM D1777: Thickness	0.4 in (10.16 mm)	7⁄1₆” (11 mm)	7/16 in (10mm)	¼ in (6.35 mm)
ASTM D4716: In-Plane Flow Rate	18 gpm/ft (224 Lpm/M)	18 gpm/ft (224 Lpm/M)	18/gal/min/ft (223 L/min/m)	12.5 gpm/ft (155 Lpm/M)
Roll Length	50 ft (15.24 M)	50 ft (15.24 M)	50 ft (15.24 M)	50 ft (15.24 M)
Roll Width	6 ft (1.8 M)	4 ft (1.22 M)	6 ft (1.8 M)	4 ft (1.22 M)